Serial Console: Difference between revisions
From Info Wiki
Jump to navigationJump to search
(→12 Volts: added ref to 1.8V devices) |
(moved terminal emulator details to new page Terminal_Emulator) |
||
| Line 1: | Line 1: | ||
Several sub-compact devices do not provide initial output to a video device. A serial console must be used for installation |
Several sub-compact devices do not provide initial output to a video device. A serial console must be used for installation |
||
== |
== Interfaces == |
||
| ⚫ | |||
*NB many small devices use 3.3 V or 5 V serial interfaces and are likely to be damaged if connected to the conventional COM socket on a PC |
*NB many small devices use 3.3 V or 5 V serial interfaces and are likely to be damaged if connected to the conventional COM socket on a PC |
||
**USB-serial cables are available cheaply and tend to use 3.3 V interface |
**USB-serial cables are available cheaply and tend to use 3.3 V interface |
||
**some newer devices require a 1.8 V serial interface |
**some newer devices require a 1.8 V serial interface |
||
| ⚫ | |||
== |
== Devices == |
||
=== Banana Pi === |
|||
*requires serial console for initial installation |
*requires serial console for initial installation |
||
| ⚫ | |||
=== |
=== Cubieboard === |
||
*default parameters do not match Banana Pi. The following settings might need to be configured |
|||
**baud rate 115200 |
|||
**software flow control Yes |
|||
**LF Yes |
|||
**CR Yes |
|||
*might be necessary to press "Enter" to get minicom to change from "Offline" to "Online" mode |
|||
| ⚫ | |||
TBA - might require no reconfiguration |
|||
== Cubieboard == |
|||
*requires serial console for initial installation |
*requires serial console for initial installation |
||
== Raspberry Pi == |
=== Raspberry Pi === |
||
*most software puts signal to a video port (Composite |
*most software puts signal to a video port (Composite or HDMI) during initial installation |
||
*use of a serial console for initial installation is optional |
*use of a serial console for initial installation is optional |
||
--[[User:Rpeters|Rod]] ([[User talk:Rpeters|talk]]) 12:36, 16 August 2015 (AEST) |
--[[User:Rpeters|Rod]] ([[User talk:Rpeters|talk]]) 12:36, 16 August 2015 (AEST) |
||
Revision as of 02:51, 20 February 2016
Several sub-compact devices do not provide initial output to a video device. A serial console must be used for installation
Interfaces
12 Volts
- NB many small devices use 3.3 V or 5 V serial interfaces and are likely to be damaged if connected to the conventional COM socket on a PC
- USB-serial cables are available cheaply and tend to use 3.3 V interface
- some newer devices require a 1.8 V serial interface
- Linux generally allocates these as /dev/ttyUSB0
Devices
Banana Pi
- requires serial console for initial installation
Cubieboard
- requires serial console for initial installation
Raspberry Pi
- most software puts signal to a video port (Composite or HDMI) during initial installation
- use of a serial console for initial installation is optional
